Logging Off; Networks; Selecting Network Operation Mode; Network Select - Motorola MTP6750 Funktionsbenutzerhandbuch

68015000663–CB (en-US)
Chapter 4: Main Menu
3 Highlight:
• User ID and press Select to enter User ID List. If you are a new user on this radio, select
[New User ID] and enter your user ID. Otherwise select your user ID from the list.
• Second line and press Edit, to enter user ID and press OK.
4 Select User PIN, enter your credentials, and press OK.
5 Logging screen is displayed.
4.18.2

Logging Off

Procedure:
1 From the home screen, press the Menu key.
2 Select RUI → Log off.
3 Press Accept.
4.19

Networks

This menu item allows you to switch between the radio operation modes.
4.19.1

Selecting Network Operation Mode

Procedure:
1 From the home screen, press the Menu key.
2 Select Networks.
3 Select one of the following:
• Network Sel — Selects the network to which the radio is allowed to register.
• Trunked Mode — Switches to the mode using infrastructure.
• Direct Mode — Switches to the mode without using infrastructure.
• Repeater Mode — Switches to the Repeater Mode.
• TXI Mode — Select Activate to stop sending any radio transmission.
NOTICE: If the radio is in TXI Mode, it is not possible to switch from Direct Mode to
Trunked Mode or Repeater Mode.
• TG Net Sel — Selects one or multiple networks determined by the selected talkgroup.
4.19.2

Network Select

This sub-menu item allows you to select a network to register your radio. Network Sel is available only
in TMO or Gateway mode, otherwise your radio display Service Restricted message.
128 Send Feedback