Herunterladen Inhalt Inhalt Diese Seite drucken

Motorola MTP6750 Funktionsbenutzerhandbuch Seite 35

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Icon
Description
Direct Mode Call – Indicates that the radio is receiving a Direct Mode call. The more
bars, the stronger the signal.
High RF Power: idle or transmitting – Indicates High RF Power option is enabled
or
and the radio is either in idle mode or is transmitting a call.
High RF Power: receiving – Indicates High RF Power option is enabled and the ra-
or
dio is receiving a call.
Direct Mode – Indicates that radio is in Direct Mode (radio-to-radio communication).
Repeater Mode – Indicates that radio is operating as a repeater in Repeater Mode.
DMO Gateway Communication Mode – Indicates that gateway is selected. The icon
has the following status:
Solid – when the radio is synchronized with the gateway.
Blinking – when the radio is not synchronized or during attachment.
No icon – during radio to radio and repeater call.
DMO Repeater Communication Mode – Indicates that the Repeater or GW + Rep
option in DMO Mode is selected. The icon has the following status:
Solid – when the radio has detected the repeater (for example when the radio re-
ceives a presence signal).
Blinking – when the radio has not detected the repeater or during attachment.
No icon – during a radio to radio and gateway call.
General Icons
All Tones Off and Duplex and Simplex Ring Muted – Indicates that all alert tones are
off and both duplex and simplex ring volume is set to 0.
All Tones Off – Indicates that:
Volume is set to 0 (when Volume Adj. Mode is set to Common).
Both simplex and duplex ring volume is set to 0 (when Volume Adj. Mode is set
to Individual).
Simplex Ring Muted – Indicates that simplex ring volume is set to 0 and duplex ring
volume is set to more than 0.
Duplex Ring Muted – Indicates that duplex ring volume is set to 0 and simplex ring
volume is set to more than 0.
Vibrate Only – Indicates that the radio vibrates to alert you of an incoming call.
Vibrate then Ring – Indicates that the radio vibrates and then rings to alert you of an
incoming call.
Low Audio – Indicates that the audio mode is changed to low.
High Audio – Indicates that the audio mode is changed to high.
Send Feedback
68015000663–CB (en-US)
Chapter 2: Getting Started
Table continued...
35

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Mtp6650Mtp6550

Inhaltsverzeichnis