User Interface - PeakTech 1350 Bedienungsanleitung

7. User Interface

1. Waveform Display Area
2. Display status, click to choose "Disconnect", "Install USB Driver" or "Connect LAN".
3. The red pointer indicates the horizontal position for the trigger
4. The pointer indicates the trigger position in the internal memory
5. Measure time with cursors
6. The two yellow dotted lines indicate the size of the viewing expanded window
7. Auto set, see 21.How to Use Executive Buttons
8. Run/Stop, see 21. How to Use Executive Buttons
9. Single Trigger, see
10. Back to Home menu
11. Hide the menu
12. Measure voltage with cursors
13. The red pointer shows the trigger level position. It can be dragged up and down.
14. Function menu,
15. Shortcut icon of resetting to factory settings, see
Shortcut icon of exporting waveform, see
Switch Three View/One View. In the Three View display mode, the left top is XP mode window,
the right top is FFT window
Show/hid function menu
16. Trigger window, see
17. Sample and Period window, see
18./19. Channel window of CH1, see
20. Display the measured type and value of the corresponding channel, see
Automatically
21. How to Use Executive Buttons
click to show/hide
8.4. How to Set the Trigger System
8.3. How to Set the Horizontal System
8.2. How to Set the Vertical System
"Default"
"Pause&Export"
-61-
10. How to Measure