Maintenance And Cleaning; After-Sales Service And Application Service - Bosch GST 90 BE Professional Originalbetriebsanleitung

OBJ_BUCH-1231-005.book Page 13 Monday, May 26, 2014 12:43 PM
Action
Mounting the splinter guard
Orbital Action Settings
Adjusting the stroke rate
preselection
Switching On and Off
Guide the power tool toward the
workpiece only when switched on
Lubrication when cutting metal
Plunge Cutting
Mounting and use of the parallel
guide
Selecting Accessories

Maintenance and Cleaning

 For safe and proper working, always keep the machine
and the ventilation slots as well as the tool holder
clean.
If the replacement of the supply cord is necessary, this has to
be done by Bosch or an authorized Bosch service agent in or-
der to avoid a safety hazard.
Clean the saw blade holder regularly. For this, remove the saw
blade from the machine and lightly tap out the machine on a
level surface.
Check the guide roller regularly. If worn, it must be replaced
through an authorised Bosch after-sales service agent.
Lubricate the guide roller occasionally with a drop of oil (see
figure 15, page 192).
Bosch Power Tools
Figure Please observe
6
7
8
9
10
11
12
13
–
After-sales Service and Application
Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
In all correspondence and spare parts order, please always in-
clude the 10-digit article number given on the type plate of
the machine.
English | 13
Page
187
187
188
188–189
189
189
190
190–191
193–194
1 609 92A 0KR | (26.5.14)