Maintenance And Service; Maintenance And Cleaning; Français; Consignes De Sécurité - Bosch GDE 18V-12 Professional Originalbetriebsanleitung

Adjusting the Drilling Depth (see figure D)
The button (1) for depth stop adjustment can be used to set
the required drilling depth X.
– Press the button (1) and slide the button on the guide (2)
so that the distance X shown in the illustration matches
your required drilling depth.
– Release the button (1) again.
Changing the dust cap (see figure E)
You must change the dust cap (8) if its wall contact surface
shows clear signs of wear and is causing dust to escape
through the extraction brush during extraction.
– Press the locking button (12) and pull the dust cap (8)
out of the holder.
– Insert the new dust cap into the holder until the locking
button audibly engages.
Emptying the Dust Box (see figures F1−F4)
Note: Wear a dust mask when performing maintenance and
cleaning on the dust box.
Empty the dust box (13) regularly as well as after completing
your work, in order to ensure that the dust extraction attach-
ment continues to perform optimally. The viewing
window (7) enables you to check how full the dust box is.
– Hold the power tool with the dust extraction attachment
horizontally and switch on the power tool for a few
seconds.
This will cause residual dust to be sucked out of the ex-
traction channel into the dust box (13).
– Press both the left-hand and right-hand release
buttons (5) and swivel the dust box (13) out of the dust
extraction attachment.
– If necessary, take the HEPA filter (14) out of the dust box
and carefully tap it out or brush down the filter flaps with
a soft brush.
Note: Do not clean the HEPA filter with water and do not
use compressed air to blow it clean.
– Shake out the dust box (13) over a suitable waste bin.
– Put the HEPA filter (14) back in the dust box (13) after
cleaning it. Then swivel the dust box into the dust extrac-
tion attachment until the release buttons (5) audibly en-
gage.

Maintenance and Service

Maintenance and Cleaning

– Clean the dust extraction attachment using a dry, soft
cloth.
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
Bosch Power Tools
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Disposal
The dust extraction attachment, accessories and packaging
should be recycled in an environmentally friendly manner.
Do not dispose of the dust extraction attach-
ment along with household waste.
Only for United Kingdom:
According to The Waste Electrical and Electronic Equipment
Regulations 2013 (SI 2013/3113) (as amended), products
that are no longer usable must be collected separately and
disposed of in an environmentally friendly manner.
Français
Consignes de sécurité
Consignes de sécurité pour les dispositifs
d'aspiration
Lisez et observez strictement les consignes de sécuri-
u
té figurant dans la notice de l'outil électroportatif uti-
lisé avec le dispositif d'aspiration.
Retirez systématiquement l'accu avant toute interven-
u
tion sur l'outil électroportatif (montage, changement
d'accessoire, nettoyage, etc.). Il y a sinon risque de
blessure si vous appuyez par mégarde sur l'interrupteur
Marche/Arrêt.
Attention risque d'incendie ! N'utilisez pas le disposi-
u
tif d'aspiration pour effectuer des perçages dans du
métal. Les copeaux métalliques chauds risquent d'en-
flammer certaines pièces du bac récupérateur de pous-
sières.
Français | 9
1 609 92A 7EM | (21.02.2023)