Fronius Power Package Installationsanleitung Seite 66

8
3
9
4
IMPORTANT!
-
-
1
5
64
1
3 6
2
5
1
4
Use appropriate ferrules when connecting the individual lines.
Calculate the cable lengths so that no loops are created.
2
- Pull the plastic clamp upward
- Loosen the metric screw joint on the
underside of the AC Combiner
- Insert the AC IN cable through the me-
tric screw joint from below into the AC
Combiner
- Attach the clamp of the strain-relief de-
vice to the rail
- Fix the AC IN cable in place using the
9
8 clamp of the strain-relief device
Cross-head screwdriver
Tightening torque = 1.5 Nm
7
- Connect the ground conductor PE to
the lower copper rail labelled with "PE"
TX25 Torx screwdriver
Tightening torque = 3.0 Nm
1