Lithium-Ion (Lifepo₄ ₄ ₄ ₄ ) Batteries; When A Load Is Connected To The Battery; Triggering A New Charge Cycle - Victron energy 12/30 (1) Anleitung

4. FLOAT
Keeps the battery at constant voltage and fully charged.
5. STORAGE
Keeps the battery at reduced constant voltage to limit
gassing and corrosion of the positive plates.
6. READY
Indicates that the battery is fully charged.
The READY LED will be on simultaneously with the FLOAT
or STORAGE LED.
7. REFRESH
Slow self discharge is prevented by an automatic weekly
refresh of the battery with a short absorption charge.
3.2 Lithium-ion (LiFePO₄ ₄ ₄ ₄ ) batteries
When charging a Lithium-ion battery, the Blue Power Charger
uses a specific charging algorithm for Lithium-ion batteries, to
ensure optimum performance. Select LI-ION with the mode
button.

3.3 When a load is connected to the battery

A load can be applied to the battery while charging, as long as
the current draw is lower than the rated output of the battery
charger.
Reconditioning is not possible when a load is connected to the
battery.

3.4 Triggering a new charge cycle

A new charge cycle will start when:
a) The charger has reached float or storage, and, due to a
load, current increases up to maximum current during more
than four seconds.
b) The MODE button is pressed during charging.
c) The AC supply has been disconnected and reconnected.
7