Replacing The Fuse; Technical Specifications - Futurelight Odd Bedienungsanleitung

The interior of the device should be cleaned at least annually using a vacuum-cleaner or an air-jet.
There are no serviceable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.

Replacing the fuse

Only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuseholder on the rearpanel with a fitting screwdriver from the housing (anti-
clockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
Max. power output (power outlet):
Max. total current (power outlet):
Protection grade:
DMX-512-connection:
Dimensions (LxWxH):
Height with inflated cover:
Max. tearing load:
Max. pressing load:
Weight (net):
Fuse:
Accessory:
Please note: Every information is subject to change without prior notice. 12.04.2011 ©
ODD-L
230 V AC, 50 Hz ~ 230 V AC, 50 Hz ~
1700 W 2200 W
1500 W 2000 W
6,5 A 8,7 A
IP 44 IP 44
3-pol. XLR 3-pol. XLR
630 x 630 x 225 mm 880 x 800 x 225 mm
1300 mm 1400 mm
45 kg 60 kg
45 kg 60 kg
18 kg 29 kg
F 1 A, 250 V F 1 A, 250 V
OC-3 Omega-clamp, No. 51836997
MP-6 mounting plate,
No. 51836990
24/24
ODD-XL
MP-7 mounting plate,
No. 51836991
00017450.DOC, Version 1.2