D) Manual Temperature Preselection For 1 - Sygonix tx.5 Bedienungsanleitung

d) Manual Temperature Preselection for 1....99 Days
This function (also called holiday function) permits setting the
temperature to a fi xed value for an extended period. The present
programming is not performed during this time.
This function is available only if a programming is present
(see chapter 9. b).
This is not the case at initial commissioning (or after re-
start). Therefore, manual temperature preselection for a
certain period of time cannot be made at this time either.
1. The room thermostat must be in the regular display (time/
temperature in the display).
Programming must be present at just described.
2. Set the desired manual temperature with the buttons "–" (3)
or „+" (2) (a hand icon appears).
The temperature can be selected within the set temperature
limits (see chapter 9. g).
3. Briefl y push the "MENU" button (4) briefl y twice. "HOLIDAY"
appears below the temperature display.
The display shows "LOCK DAY" and the days fl ash tot he right
of it ("1d"...."99d").
4. Set the desired time (1....99 days) with the buttons "–" (3) and
"+" (2). Keep the respective button pressed for quick adjust-
ment.
5. Confi rm the setting with "OK" (5).
The room thermostat then is back in regular display.
You can also prematurely terminate manual temperature prese-
lection by briefl y pushing the button "MENU" (4) or "OK" (5).
If manual temperature preselection was terminated, the hand
icon disappears. The temperature control is taken over by the set
programme again.
84
The home technology brand for the entire house. More information at www.sygonix.com