E) Function G5 "Clock Settings - Sygonix tx.5 Bedienungsanleitung

e) Function G5 "CLOCK SETTINGS"

You may switch the time display between 12h and 24h mode here
and set the date and time.
Proceed as follows:
1. After selecting this function G5 "CLOCK SETTINGS" and con-
fi rming with "OK" (5), the display "12H" or "24H" fl ashes.
2. Select 12h or 24h mode with the buttons "–" (3) and "+" (2).
In 12h-mode, "AM" is displayed to the behind the time in the
fi rst half of the day, "PM" in the second.
3. Confi rm the selection with "OK" (5). The year now fl ashes in
the display (display "YEAR" at the bottom of the display).
4. Set the year with the buttons "–" (3) or "+" (2) (for quick ad-
justment, keep the respective button pushed). Briefl y push
the button "–" (3) once when the display shows "0000".
5. Confi rm the setting with "OK" (5). The month now fl ashes in
the display (display "MONTH" at the bottom of the display).
6. Set the month with the buttons "–" (3) or "+" (2) (for quick
adjustment, keep the respective button pushed).
7. Confi rm the setting with "OK" (5). The date now fl ashes in the
display (display "DAY" at the bottom of the display).
8. Set the date with the buttons "–" (3) or "+" (2) (for quick ad-
justment, keep the respective button pushed).
9. Confi rm the setting with "OK" (5). The hours of the time fl ash
in the display (display "HOUR" at the bottom of the display).
10. Set the hours with the buttons "–" (3) or "+" (2) (for quick ad-
justment, keep the respective button pushed).
65