Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating Instructions
Temperature Controller
Item No. 1761770
Intended Use
This product is suitable to switch an electric consumer on or off wirelessly controlled by tem-
perature using a suitable receiver (not included) of the RS2W radio switch system. The electric
consumer can also be switched on and off manually.
The temperature controller is powered by two AAA/micro-batteries. The temperature control-
ler can be toggled between a heating mode and a cooling mode so that either a heating or a
cooling device can be controlled. Switching times can be specified for an individual day, for all
weekdays (Monday - Friday) or for the entire week (Monday - Sunday) with 8 different switching
programmes that work independently of each other.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bath-
rooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged. In
addition, improper use can result in short circuits, fires, electric shocks or other hazards. Read
the instructions carefully and store them in a safe place. Make this product available to third
parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery Content
• Temperature controller
• Operating instructions
Up-to-date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Explanation of Symbols
The symbol with the lightning in the triangle is used if there is a risk to your health,
e.g. due to an electric shock.
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
Safety Instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting per-
sonal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General Information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dan-
gerous playing material for children.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• The product must not be exposed to extreme temperatures, direct sunlight or
strong vibrations. Keep the product away from strong magnetic fields generated
by machines, electric motors or loudspeakers.
• Do not operate the product in environments where there are high levels of dust,
flammable gases, vapours or solvents. There is a danger of fire and explosion!
• Do not use this product in hospitals or medical institutions. Although the sensor
emits only relatively weak radio signals, these may lead to the malfunction of life-
supporting systems. The same may also apply to other areas.
• Consult an expert when in doubt about the operation, safety or connection of the
appliance.
• Maintenance, modifications and repairs must only be completed by a technician
or an authorised repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
b) Connected Devices
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
c) (Rechargeable) Batteries
• Correct polarity must be observed while inserting the (rechargeable) battery.
• The (rechargeable) batteries should be removed from the device if it is not used
for a long period of time to avoid damage through leaking. Leaking or damaged
(rechargeable) batteries might cause acid burns when in contact with skin, there-
fore use suitable protective gloves to handle corrupted (rechargeable) batteries.
• (Rechargeable) batteries must be kept out of reach of children. Do not leave (re-
chargeable) batteries lying around, as there is risk, that children or pets swallow
them.
• All (rechargeable) batteries should be replaced at the same time. Mixing old and
new (rechargeable) batteries in the device can lead to (rechargeable) battery leak-
age and device damage.
• Rechargeable batteries must not be dismantled, short-circuited or thrown into fire.
Never recharge nonrechargeable batteries. There is a risk of explosion!
Features and Functions
Also consider the chapter "Technical data" at the end of these operating instructions.
• Operation via two batteries/rechargeable batteries of type AAA/Micro
• Measures and displays temperature and humidity at its location
• Cooling or heating mode can be toggled
• One receiver can be connected
• 8 switching programmes (each can be allocated one individual weekday, the period "Mon-
day - Friday" or the period "Monday - Sunday")
• Manual operation of the receiver possible
• Receiver is controlled wirelessly (868 MHz technology)
• Positioning on a table or mounting on a wall
Getting Started
a) Inserting/Replacing Batteries
• Open the battery compartment on the back of the temperature controller and insert two bat-
teries of type AAA/micro observing the correct polarity (pay attention to plus/+ and minus/-).
• All display segments appear briefly, then the digital clock starts and the first measurement
value for temperature and humidity is shown on the right in the display.
• Close the battery compartment again.
The battery needs to be replaced when the display contrast is reduced considerably.
The programmed data is preserved when the battery is replaced; you only need to
set the time again.
It is possible to operate the temperature controller with rechargeable batteries.
However, the operating time and the display contrast, are greatly reduced due to the
lower voltage (battery = 1.5 V, rechargeable battery = 1.2 V). We therefore recom-
mend to use only high-quality alkaline batteries instead of rechargeable batteries.
b) Setting the Time
• Repeatedly press the "FUNC" button briefly until "CANCEL" appears in the display.
• Hold the "FUNC" button pressed (approx. 3 seconds) until the weekday flashes on the top
in the display (above the displayed time).
• Set the weekday or the period using the "+/ON" or "-/OFF" buttons.
"MO" = Monday
"TU" = Tuesday
"WE" = Wednesday
"TH" = Thursday
"FR" = Friday
"SA" = Saturday
"SU" = Sunday
• Briefly press the "FUNC" button to confirm and the hours will flash.
• Set the hours with the "+/ON" or "-/OFF" buttons. For quick adjustment, press and hold
down the corresponding button for longer.
• Briefly press the "FUNC" button to confirm and the minutes will flash.
• Set the hours minutes with the "+/ON" or "-/OFF" buttons. For quick adjustment, press and
hold down the corresponding button for longer.
• Briefly press the "FUNC" button to confirm and to exit the setting mode.
Werbung
Inhaltsverzeichnis
