E) Function H5 "Reset All - Sygonix tx.5 Bedienungsanleitung

e) Function H5 "RESET ALL"

This resets the room thermostat to factory settings.
All settings and programming are lost irrevocably.
Then proceed as described in the chapters above for
programming.
Proceed as follows:
1. After selecting this function H5 "RESET ALL" and confi rming
with "OK" (5), either "YES" or "NO" fl ashes.
2. Use the buttons "–" (3) and "+" (2) to select:
"YES" = Perform reset
"NO" = Cancel
3. Confi rm the selection with "OK" (5).
When selecting "YES", all settings are reset to factory set-
tings. This takes a few seconds (all buttons of the touch
screen display are without function during this).
The room thermostat is then in the previous menu for selec-
tion of functions again.
To leave the menu and return to the regular display, push the
button "MENU" (4), repeatedly if required.
80
The home technology brand for the entire house. More information at www.sygonix.com