Winding The Bobbin; Setting The Spool; Removing The Bobbin - ELNA 2600 Bedienungsanleitung

Winding the Bobbin

Setting the spool

Place a spool of thread on the spool pin with the thread
coming off the spool as illustrated.
A: Press the large spool holder firmly against the spool
of thread.
Large spool holder
1
B: For a small spool, use the small spool holder.
Small spool holder
2
Additional spool pin
The additional spool pin is for bobbin winding without
unthreading the machine.
Insert the additional spool pin into the hole.
Place the felt cushion and a spool on the pin.
Additional spool pin
3
Felt cushion
4
Spool pin hole
5

Removing the bobbin

Push the hook cover plate release button to
1
the right and remove the cover plate.
Hook cover plate release button
1
Hook cover plate
2
Lift out the bobbin.
2
Bobbin
3
24