ELNA 2600 Bedienungsanleitung Seite 70

To sew
Attach zipper foot with the right side pin.
1
Fold back the upper layer seam allowance. Fold back
the lower layer seam allowance to leave a 1/8"
(0.4 cm) margin of fabric.
Lower layer
1
End of the opening
2
Zipper teeth
3
1/8" (0.4 cm) margin
4
Upper layer
5
Opening size
6
Folded edge
7
Basting
8
Place zipper teeth next to margin edge and baste the
2
zipper tape to the lower fabric layer.
Return thread tension and stitch length to original
settings.
Sew a seam the entire length of zipper tape.
Stop the machine 2" (5 cm) before reaching the
3
slider, with needle in the fabric and raise the foot,
then unzip to clear a path for stitching.
Slider
9
2" (5 cm)
Remove fabric and close zipper. Take the upper
4
fabric layer and lay it flat over the zipper.
Baste the zipper tape to the upper fabric layer.
Basting
9
11
Zipper tape
9
12
70