Appliqué - ELNA 2600 Bedienungsanleitung

q
w
86
Satin Stitch Appliqué
Machine setting
Stitch: 2
1
Stitch width: 3 – 5
2
Stitch length: 0.5 – 1
3
Thread tension: 1 – 4
4
Presser foot: F
5
Foot pressure: "2"
6
NOTE:
Apply stabilizer to the fabric for the stitch to form
correctly.
Baste appliqué pieces on the fabric, or fuse the appliqué
pieces on with fusible webbing.
Stitch around the appliqué, making sure the needle
swing off to the right side of the appliqué outside edge.
Turning a curve or corner:
Stop the machine and lower the needle into the fabric on
the outside edge of the appliqué.
Raise presser foot, pivot the fabric, lower foot and sew.
NOTE:
Return the foot pressure dial to "3" after finishing.