Clatronic ar 615 Bedienungsanleitung Seite 41

5....-05-AR 615 CD MP3
• MASK DPI/ALL
This hides alternative frequencies (AF) during the search for a programme
identification (PI).
MASK DPI:
MASK ALL: In the search for a programme identification (PI) alternative
• DSP
In DSP mode you can select the equaliser settings POP M, ROCK M,
CLASS M and FLAT M. Select DSP OFF to carry out your own adjust-
ments. See also section 3a.
• LOUD ON/LOUD OFF
Switching the LOUDNESS function on and off.
When the volume is low the LOUDNESS function (LOUD) expands the
sound characteristics by increasing the treble and bass sounds.
• BEEP ON/OFF Confirmation Beep
You can select two types of confirmation beep when a button is pressed.
BEEP ON:
BEEP OFF: The confirmation beep is switched off.
• SEEK 1, SEEK 2 (only available during radio operation)
Seek function with the
SEEK 1: Keep the
next station that is reached.
SEEK 2: As long as the
will continue in the frequency band.
• STEREO/MONO switching (only possible during radio operation)
• LOCAL/DX (only available during radio operation)
Your radio can receive RDS EON data. The term "EON" signifies the trans-
mission of additional station information within a station chain, e.g. WDR. If
a traffic announcement (TA) is made within a station chain, the radio swit-
ches from a station which does not transmit traffic announcements to one
that does within the same station chain. Reception of this station data is
shown in the display by the EON symbol. You can choose between the
EONTA LOCAL and EONTA DISTANCE mode for local or long-distance
traffic news. The purpose of this function is to prevent the radio switching
unnecessarily to an EON-TA traffic news item. If an EON station is a long
distance away, it may be that in some cases EON TA information can still
be received from the station. The radio then switches to this EON station
and tries to receive the traffic announcements. The signal is too weak,
24.03.2004
When the device is searching for the programme identification
(PI) of a station the alternative frequencies with a different
programme identification remain hidden.
frequencies with a different programme identification and sta-
tions with a strong signal level without an RDS signal remain
hidden.
The confirmation beep is heard whenever a button is pressed.
/ buttons during radio operation.
/ buttons pressed down and the radio will stop at the
/ buttons are pressed down the search function
14:27 Uhr Seite 41
GB
41