Safety Instructions; Operating The Appliance; Switching On; Power Mode - Caso W2100 Original Bedienungsanleitung

15.3 Safety Instructions

Warning
► Do not leave the appliance unattended during operation, so that you can intervene
quickly in the event of danger.
► Do not move the appliance during operation or with hot cookware on the hot plate.
► Ensure that the cookware is properly centred on the hob. It must not be positioned on
the control panel or on the frame.
► In order to prevent overheating do not place any aluminium foil or metal panels on the
appliance surface.
► Do not touch the hot surface of the ceramic hob.
Although the induction cooktop itself does not produce any heat during the cooking
process, the temperature of the cookware does heat up the hob.
► Keep the hob and the underside of the pot clean and dry at all times. If liquid gets
between the base of the pot and the hob, this liquid can vaporise and the resulting
pressure can cause the pot to jump into the air, with a resulting risk of injury.
► Switch the appliance off after use. This avoids unnecessary use of energy, and
ensures your safety.
► If the appliance is unused for extended periods of time, we recommend that the
appliance be unplugged from the mains.

15.4 Operating the Appliance

15.4.1

Switching On

• Plug the power plug into a suitable outlet.
• The temperature of the cooker plate surface displayed: is the temperature of the
surface of the induction cooker lower than 50°C, the display shows „L". When the
temperature of the cooker plate surface is over 50 °C, it is displaying „H". An acoustic
signal sounds. Now the device is in standby mode.
• Place a suitable cooking pot with its contents to be cooked on the centre on the hob (Ø
120 mm - 260 mm).
• Now press the ON/STANDBY switch 1. to turn on the W2100 . The control lamps
"Level" and "Temp" blink and an acoustic signal sounds.
15.4.2

Power Mode

• Press the function key 4. The preset power stage "8" is selected and the device turns
on.
• With the + / - Keys (5+6), you can change the settings at any time in a range from 1 –
12.
caso W2100 43