Inhaltsverzeichnis
Werbung
en
Fault
The refrigerating unit
is switching on more
frequently and for longer.
Refrigerator has no
cooling capacity.
The temperature in
the cool fresh"
compartment is too
cold or too warm.
26
Possible cause
Appliance door opened
frequently.
The ventilation openings
have been covered.
Appliance has been
switched off.
Power failure; the fuse has
been switched off; the
mains plug has not been
inserted properly.
The fixed setting has been
selected too high or too
low.
Remedial action
Do not open the door unnecessarily.
Remove obstacles.
Press the on/off button Fig. 2/1.
Check whether the power is on, check the
fuses.
The temperature in the cool fresh"
compartment can be corrected (for example,
if there is frost in the cool fresh"
compartment).
For this purpose, switch off the On/Off
button, Fig. 2/1. Simultaneously press
buttons Fig. 2/2 and Fig. 2/1 until display
Fig. 2/4 flashes.
Then the set temperature flashes (e.g. 4 °C).
To set the temperature, keep pressing the
button, Fig. 2/2, until the required
temperature is displayed.
Step 0 - coldest setting
Step 6 - warmest setting
Step 4 factory setting (almost 0 °C)
The numbers on the display do not
correspond to °C temperatures in the
cool fresh" compartment.
The set temperature is saved after 1 minute
and the display switches back to the current
temperature in the refrigerator
compartment.
Attention: If the display, Fig. 2/4, does not
flash, the buttons were inadvertently held
down too long. Switch off the appliance
again and repeat the process as described
above.
Werbung
Inhaltsverzeichnis
