IKEA SMAKOKA Handbuch Seite 15

ENGLISH
Adjusting minimum gas setting of taps
To ensure that the minimum setting is
correctly adjusted, remove the knob (E) and
proceed as follows:
- tighten screw to reduce the flame height
(-);
- loosen screw to increase the flame height
(+).
The adjustment must be performed with the
tap in minimum gas setting position (small
flame ) .
- The primary air of the burners does not
need to be adjusted.
- At this stage, light up the burners and
turn the knobs from max position
to minimum position
stability.
Upon completion of adjustment, reseal
the work surface using sealing wax or an
equivalent material.
E
to check flame
GB
Ensure that the installation and gas
connections are performed by a qualified
technician, following the manufacturer's
instructions and in compliance with current
local safety regulations.
15