Listening To Messages Using The Remote Access Facility - AUDIOLINE DECT 4800 Bedienungsanleitung

9.6.2

Listening to messages using the remote access facility

1. Call your number and wait until your call is answered.
2. While you are listening to your greeting, press the
the three-digit PIN code. If the entry is incorrect, the greeting will be
repeated. Press the
correct, you will hear two signal tones. If the PIN code is entered incorrectly
three times, the connection will be cut off.
3. The recorded messages will be played back immediately. After the
messages have been played, you will hear two signal tones.
4. After the messages have been played back, further functions can be carried
out using the remote access facility within the next 8 seconds. For more
information, see the following table.
5. Replace the receiver when you have finished with the remote access facility.
Remote access functions
= Repeat messages (rewind)
= Play back all messages again
= Play back next message (forward wind)
= Play back a memo
= Stop button
= Play back current greeting
= Record a memo
= Turn the answering machine on or off
A short signal tone => Answering machine is switched off
Two signal tones => Answering machine is switched on.
= Record new greeting
= Delete message playing
and = Delete all messages
# = Change mode
A short signal tone => Greeting only, no recording
Two signal tones => Answering machine will record calls
- The answering machine -
button and re-enter the PIN code. If the entry is
button and then enter
105