Multiple Handsets; Making An Internal Call; Connecting External Calls To Another Handset - AUDIOLINE DECT 4800 Bedienungsanleitung

10 Multiple handsets

Up to four additional handsets can be logged on to your base station. You can
obtain these additional handsets from your AUDIOLINE dealer with the designation
DECT 4801.
Note: Handsets from other manufacturers can also be integrated into the telephone
system by means of the internationally adopted GAP standard. In the same way,
you can use an AUDIOLINE handset on base stations from other manufacturers, as
long as these units work using the GAP standard.
When you use multiple handsets you will have the following options:
Internal calls between handsets.
-
External calls can be forwarded between handsets.
-
Incoming external calls are signalled on all handsets.
-
Room monitoring
-
Note: If another handset is already using the external line, the message EXT will
appear on all handsets. In this case, it is not possible to make a further external call.

10.1 Making an internal call

When you have connected multiple handsets to a base station, you will be able to
make internal calls. To do this, press the
required handset. The call is accepted with the call button
If an external call comes in while you are making an internal call, you will hear short
signal tones and the message EXT will flash in the display. To take the external call,
end the internal call by means of the call button
the call button

10.2 Connecting external calls to another handset

If you have accepted an external call on one handset, you can forward the external
call to another handset. To do this, press the
the required handset. After the internal call has been accepted at the other handset,
you have the following options:
A. Consultation / Brokering: You can now speak to the internal subscriber and
return to the external caller by pressing the
the external and the internal call as many times as you like in this way.
B. Forward the call: The external call is forwarded to the handset called by
pressing the call button
110
- Multiple handsets -
.
on the first handset.
button and then the number of the
on the handset called.
and accept the external call with
button and then the number of
button. You can switch between