Switching The Answering Machine On/Off; Ans Record, Ans Only Or Am Off; General Settings; Maximum Recording Time - AUDIOLINE DECT 4800 Bedienungsanleitung

9.1

Switching the answering machine on/off

To switch the answering machine on, proceed as follows:
Button Display
ANS RECORD, ANS
ONLY or AM OFF
When the answering machine is switched on, the symbol
display and the
9.2

General settings

9.2.1 Maximum recording time

The integral answering machine can digitally
store up to 9 minutes of incoming messages.
The maximum length of each incoming
message is either 1 or 2 minutes. If the caller
speaks for longer, a signal tone sounds and
the call will be cut off. If there is a pause of
more than 3 seconds during recording, the
call will automatically be terminated with a
signal tone. No more calls will be answered if
the memory capacity for new messages is
exhausted and the display will show the
appropriate message.
- The answering machine -
Comment
The messages ANS RECORD, ANS ONLY or
AM OFF will appear in the display
Switching on or off takes ca. 2 seconds and is
confirmed by a signal tone.
Hold button pressed to return to main display.
indicator light on the base station comes on.
appears in the
Button Display
FEATURES
ANSWER MAC
6 x
RING DELAY
MSG LENGTH
2 x
1 MINUTE or 2
MINUTES
Select the required
length.
MSG LENGTH
Press and hold
button
97