Intended Purpose - testo 0632 3330 Anwendungshinweise

2. Intended purpose

16
2. Intended purpose
This chapter gives the areas of application for which the
product is intended.
Use the product only for those applications for which it was
designed. Ask Testo if you are in any doubt.
When used in combination with a compatible testo
measuring instrument, the testo gas leak detection probe
0632 3330 allows gases to be detected for short periods.
The multi-range sensor can optionally trace methane (CH4)
or propane (C3H8) in a concentration range of a few ppm
to 10,000 ppm.
The product was designed for the following
tasks/applications:
· Gas detection in enclosed spaces
· Locating of leaks in gas systems.
The product must not be used in the following areas:
· for long-term measurements
· as a safety (alarm) device
information@i
www. .com