Safety Instructions - testo 0632 3330 Anwendungshinweise

1.

Safety instructions

This chapter gives general rules which must be followed
and observed if the product is to be handled safely.
You must also comply with the safety information in the
instruction manual for the measuring instrument!
Avoid personal injury/damage to equipment
Do not use the product as a monitoring instrument for
personal safety! The product is not a protective
equipment!
Report damage, faults or error messages to the
manufacturer and have the product inspected and
repaired. Faulty products constitute a safety risk, which
means they must no longer be used.
Avoid contamination of the probe and contact of the
sensor with silicone or silicone vapours as these can
lead to incorrect readings or destruction of the sensor.
Product safety/preserving warranty claims
Operate the product only within the parameters
specified in the Technical Data.
Do not use any force. Use the product properly and
according to its intended purpose only.
Do not open the product. Maintenance and repair work
must only be carried out by authorised personnel.
Ensure correct disposal
Send the product back to Testo at the end of its useful
life. We will ensure that it is disposed of in an
environmentally friendly manner.
www. .com
1. Safety instructions 15
information@i