Cleaning The Hook Race; Inserting The Bobbin Holder - ELNA eXperience 520 Installationsanleitung

Elna 520 Sewing Machine Instruction Manual
z
q
w
x
c
r
v
y
b
zx
e
c
r
www.janomeflyer.com
e
r
t
u
w
q

Cleaning the Hook Race

WARNING:
Turn the power switch off and unplug the machine
before cleaning.
NOTE:
Do not dismantle the machine in any way other than
what is explained in this section.
z Remove the setscrew w on the needle plate e
with a screw key q. Remove the needle plate e.
x Take out the bobbin. Lift up the bobbin holder r
and remove it.
c Clean the bobbin holder with a lint brush t.
v Clean the feed dog y and hook race u with the
lint brush.
b Clean the hook race u with a soft dry cloth.
(You may also use a vacuum cleaner.)

Inserting the Bobbin Holder

z Insert the bobbin holder.
x The knob q of the bobbin holder should fit next to
the stopper w in the hook race.
c Reattach the needle plate, aligning the needle
plate guide pins e with the guide holes r in the
needle plate and tighten the setscrew.
NOTE:
After cleaning the machine, make sure the needle
and presser foot are attached.
82
520 Owners Manual/ User Guide