Trouble Shooting; Corrective Action - FLORABEST FAH 18 C3 Betriebsanleitung

GB IE

Trouble Shooting

Problem
Appliance
won't start
Intermittent op-
eration
Blades become
hot
Bad trim
18
Possible cause
Battery ( 9) discharged
Battery ( 9) not inserted
Safety switch ( 4) not
pressed properly
On/Off switch (
tive
Internal loose contact
On/Off switch (
tive
Blades ( 2) are blunt
Blades ( 2) are notched
Too much friction due to
lack of lubrication
Too much friction due to
missing lubrication
Knife bar ( 2) dirty
Knife bar ( 2) blunt
Bad cutting technique
Battery ( 9) not fully
charged

Corrective action

Recharge battery (see „Charging")
Insert battery (see „Operation")
Turn on (see "Operation")
7) defec- Send in to Service Centre for repair
Send in to Service Centre for repair
7) defec-
Have the blades sharpened or re-
placed (Service Centre)
Have the blades checked or replaced
(Service Centre)
Oil the knife bar (
Lubricate knife bar (
Clean knife bar
Grind or have knife bar replaced
(Service Centre)
See ("Working with the hedge trim-
mer")
Recharge battery (see "Charging")
2)
2)