Introduction; Proper Use; Description Of Parts And Features; Scope Of Delivery - Parkside PBSG 95 B1 Bedienungs- Und Sicherheitshinweise

Introduction

Drill sharpening machine PBSG 95 B1
Introduction
Q
We congratulate you on the purchase of your new
device. You have chosen a high quality product. The
instructions for use are part of the product. They
contain important information concerning safety,
use and disposal. Before using the product, please
familiarise yourself with all of the safety information
and instructions for use. Only use the unit as described
and for the specified applications. If you pass the
product on to anyone else, please ensure that you
also pass on all the documentation with it.

Proper use

Q
The device is designed to sharpen steel drill bits
according to DIN 338, DIN 340, DIN 345,
DIN 1869 and DIN 1897 (MODEL Type N).
Carbide drill bits must not be milled with this device.
Any other use or modification to the device shall be
considered as improper use and could give rise to
considerable dangers. The manufacturer will not ac-
cept liability for loss or damage arising from improper
use. The device is not intended for commercial use.

Description of parts and features

Q
Rotary switch ("STONE" = Sharpening stone)
1
Sharpening stone cover
2
Sharpening stone cover screw
3
ON / OFF switch
4
Sharpening stone
5
Spring
6
Threaded connection
7
Metal washer
8
Sharpening stone holder
9
Ventilation slots
10
Drill guide
11
6 GB/IE

Scope of delivery

Q
1 drill sharpening machine PBSG 95 B1
1 carrying case
16 titanium-coated HSS drills (see Fig. E)
2 spare sharpening stones
1 set of operating instructions

Technical data

Q
Dimensions:
Weight:
Nominal voltage:
Rated Input:
Nominal rotation speed: 1350 rpm
For drill bits of diameter: 3–10 mm
Protection class:
Noise data:
Refers to A-weighted sound level.
No-load
Sound pressure level:
Sound power level:
Uncertainty K:
Load (Grinding)
Sound pressure level:
Sound power level:
Uncertainty K:
Values determined in accordance with
EN ISO 11201, EN ISO 4871.
Vibration emission value: ≤ 2,5 m / s
Value determined in accordance with
EN ISO 5349-1, EN ISO 5349-2.
Note: The vibration emission value specified in
these instructions was measured in accordance with
a standardised testing method and can be used to
compare power tools. The vibration emission value
specified can also be used to assess the vibration
load.
The vibration emission value
during actual use of the power tool may differ from
221 x 174 x 103 mm
(w x h x d)
950 g
230–240 V ~ 50 Hz
95 W
II /
L 70.0 dB (A)
pA
L 83.0 dB (A)
WA
3 dB
L 72.8 dB (A)
pA
L 85.8 dB (A)
WA
3 dB
2