Safety Advice; Workplace Safety; Electrical Safety - Parkside PLBS 30 A1 Bedienungs- Und Sicherheitshinweise

Safety advice

Safety advice
Q
CAUTION! Failure to observe the instructions and advice given be-
low may result in electric shock, fire and / or serious injury.
1.

Workplace safety

a) Keep your working area clean and well lit. Untidy or
poorly lit working areas can lead to accidents.
b) Do not work with the device in potentially explosive
environments in which there are inflammable liquids,
gases or dusts. Electrical power tools create sparks, which can
ignite dusts or fumes.
c) K eep children and other people away while you are
operating the electrical tool. Distractions can cause you to
lose control of the device.
2.

Electrical safety

To avoid danger to life from electric shock:
a) The mains plug on the device must match the mains
socket. The plug must not be modified in any way.
Do not use an adapter plug with devices fitted with
a protective earth. Unmodified plugs and matching sockets
reduce the risk of electric shock.
b) Keep the device away from rain or moisture. Water
entering an electrical device increases the risk of electric shock.
c) Use a residual current device (RCD) for protection if
operating the electrical power tool in a moist envi­
8 GB/IE