Safety Advice; Workplace Safety; Electrical Safety - Parkside PLP 100 A1 Bedienungs- Und Sicherheitshinweise

Safety advice

½
CAUTION! Failure to observe the instructions and advice given
below may result in electric shock, fire and / or serious injury.

1. Workplace safety

a) Keep your working area clean and well lit. Untidy or
poorly lit working areas can lead to accidents.
b)
Do not work with the device in potentially
explosive environments in which there are
inflammable liquids, gases or dusts. Electrical
power tools create sparks, which can ignite dusts or fumes.
c)
Keep children and other people away
while you are operating the electrical tool.
Distractions can cause you to lose control of the device.

2. Electrical safety

a) The mains plug on the device must match the mains sock-
et. The plug must not be modified in any way. Do not
use an adapter plug with devices fitted with a protec-
tive earth. Unmodified plugs and matching sockets reduce the
risk of electric shock.
b) Keep the device away from rain or moisture. Water
entering an electrical device increases the risk of electric shock.
c) Use a residual current device (RCD) for protection if
operating the electrical power tool in a moist envi-
Safety advice
GB/MT 51