Control Board - EuroLite LED TMH FE-1000 Bedienungsanleitung

Control Board

The Control Board offers several features: you can simply set the starting address, run the pre-programmed
program or make a reset.
The main menu is accessed by pressing the Mode/Esc-button (display flashing). Browse through the menu
by pressing Up or Down. Press the Enter-button in order to select the desired menu. You can change the
selection by pressing Up or Down. Confirm every selection by pressing the Enter-button. You can leave
every mode by pressing the Mode/Esc-button. The functions provided are described in the following
sections.
Default settings shaded.
Main Sub
menu menu
ADDR
SLAV
MODE SEQU
SUND
TEMP
LAMP
ADJU
INFO DRIT
REST
MOVE
SET
UI
CALI
VER
LOAD
MODE
• Press [MODE/ESC] to enter the main menu "MODE" (display flashing)
• Press [ENTER] and select "ADDR", "SLAV", „SEQU" or „SUND" by pressing [UP] or [DN].
• Press [ENTER] for selecting the desired sub menu.
DMX address setting
With this function, you can adjust the desired DMX-address via the Control Board.
• Select "ADDR" by pressing [UP] or [DN].
• Press [ENTER], adjust the DMX address by pressing [UP] or [DN].
• Press [ENTER] to confirm.
• Press [MODE/ESC] in order return to main menu.
Extension
XXX
ALON/MAST
ALON/MAST
80-139°C,90°C
CHxx=XXX
XXXC
RPAN
RTIL
DEGR
ENCO
MODE
MIC
SIGN
FAN
HIBE OFF, 01M-99M, 15M
BACK 02M-60M, 02M
FLIP
USER
CODE
CHXX
X1.0.0
ON/OFF
ON/OFF
ON/OFF
630/540
ON/OFF
MOD1/MOD2
0~99%, 60%
Close/Hold/
Auto/Sund
Auto
/High
ON/OFF
USE1/USE2
XXX
XXX Calibrate and adjust the effect wheels
31/39
Function
DMX address setting
Slave setting
Automatic Program Run
in stand-alone/as master
Sound-control Program Run
in stand-alone/as master
LED off at temperature
Service function
Temperature near LED driver
Reset
PAN Reverse
TILT Reverse
Select PAN-angle
630° or 540°
Automatic PAN/TILT correction
Adjust PAN/TILT speed
Mic sensitivity
Run if no DMX
Fans mode select
Standby mode
Display shutoff time
Display reverse 180°
User's mode to change
channel numbers
Password is "050"
Software version
Restore factory settings
00081193, Version 1.0