EuroLite LED TMH FE-1000 Bedienungsanleitung Seite 33

SET
• Press [MODE/ESC] to enter the main menu "SET" (display flashing)
• Press [ENTER] and select "REST", "MOVE", "UI", "CALI", "VER" or "LOAD" by pressing [UP] or [DN].
• Press [ENTER] for selecting the desired sub menu.
REST
Reset
With this function you can Reset the device via the Control Board.
• Select "REST" by pressing [UP] or [DN].
• Press [ENTER] to confirm.
• Press [MODE/ESC] in order to return to the main menu.
MOVE
PAN Reverse
With this function you can reverse the PAN-movement.
• Select "RPAN" by pressing [UP] or [DN].
• Press [ENTER], the display shows "OFF".
• Press [UP] to select "ON" if you wish to enable this function or [DN] to select "OFF" if you
don't.
• Press [ENTER] to confirm.
• Press [MODE/ESC] in order to return to the main menu.
TILT Reverse
With this function you can reverse the TILT-movement.
• Select "RTIL" by pressing [UP] or [DN].
• Press [ENTER], the display shows "OFF".
• Press [UP] to select "ON" if you wish to enable this function or [DN] to select "OFF" if you
don't.
• Press [ENTER] to confirm.
• Press [MODE/ESC] in order to return to the main menu.
Select PAN degree
With this function you can select the PAN-degree.
• Select "DEGR" by pressing [UP] button.
• Press [ENTER], the display shows "540".
• Press [UP] to select the desired degree "630" or "540".
• Press [ENTER] to confirm.
• Press [MODE/ESC] in order to return to the main menu.
Automatic PAN/TILT correction (Feedback)
With the function "ENCO" you can adjust the PAN/TILT movement to the correct starting
position.
• Select "ENCO" by pressing [UP] or [DN].
• Press [ENTER], the display shows "ON".
• Press [UP] to select "ON" if you wish to enable this function or [DN] to select "OFF" if you
don't.
• Press [ENTER] to confirm.
• Press [MODE/ESC] in order to return to the main menu.
Adjust PAN/TILT speed
With this function you can define the PAN/TILT speed. You can select one of two different
modes.
• Select "MODE" by pressing [UP] button.
• Press [ENTER], the display shows "MOD1".
• Press [UP] to select the desired degree "MOD2" or "MOD1".
• Press [ENTER] to confirm.
• Press [MODE/ESC] in order to return to the main menu.
33/39 00081193, Version 1.0