EuroLite LED TMH FE-1000 Bedienungsanleitung Seite 34

UI
Mic sensitivity
With this function, you can select the desired microphone sensitivity between 0 % and 99 %.
• Select "MIC" by pressing [UP] or [DN].
• Press [ENTER] to confirm.
• Press [UP] to select the desired sensitivity.
• Press [ENTER] to confirm.
• Press [MODE/ESC] in order to return to the main menu.
Status if no DMX-signal
With this function, you can select the status for the case that there is no DMX-signal. You
can choose between „CLOS" for Blackout, „HOLD" for holding the last position, „AUTO" for
running the internal program and „SUND" for the sound-controlled program-run.
• Select "SIGN" by pressing [UP] or [DN].
• Press [ENTER].
• Press [UP] or [DN] to select between "CLOS", "HOLD", "AUTO" and "SUND".
• Press [ENTER] to confirm.
• Press [MODE/ESC] in order to return to the main menu.
Adjust ventilation fan
With this function, you can adjust the ventilation fan.
• Select "FAN" by pressing [UP] or [DN].
• Press [ENTER] to confirm; the display shows "AUTO".
• Press [UP] to select "HIGH" or "AUTO".
• Press [ENTER] to confirm.
• Press [MODE/ESC] in order to return to the main menu.
Hibernation - power standby mode
With this function you can put the device in the power standby mode. This function will be
automatically activated after a predefined period of time of no DMX activity. In standby mode
the lamp/LEDs and all motors will power down if no DMX signal is sent to the fixture for a
period of e. g. 15 minutes (can be user defined). The fixture will automatically reset and
return to normal operation once a DMX signal is sent.
• Select "HIBE" by pressing [UP] or [DN].
• Press [ENTER] to confirm, the display shows "XXM" or "OFF". "X" stands for the minutes.
• Press [UP] or [DN] to select "1-99M" for the desired time – or "OFF" to deactivate this
function.
• Press [ENTER] to confirm.
• Press [MODE/ESC] in order to return to the main menu.
Backlight
With this function you can shut off the display after 2 to 60 minutes.
• Select "BACK" by pressing [UP] or [DN].
• Press [ENTER] to confirm, the display shows "XXM". "X" stands for the minutes.
• Press [UP] or [DN] to select "2-60M" for the desired time.
• Press [ENTER] to confirm.
• Press [MODE/ESC] in order to return to the main menu.
Reverse display
With this function you can rotate the display by 180°.
• Select "FLIP" by pressing [UP] or [DN].
• Press [ENTER], the display shows "OFF".
• Press [UP] to select "ON" if you wish to enable this function (the display will rotate by
180°) or [DN] to select "OFF" if you don't.
• Press [ENTER] to confirm.
• Press [MODE/ESC] in order to return to the main menu.
User mode
With this function, you can select the DMX channel mode.
• Select "USER" by pressing [UP] or [DN].
• Press [ENTER] to confirm; the display shows "USE1".
• Press [UP] to select "USE2" or "USE1".
• Press [ENTER] to confirm.
• Press [MODE/ESC] in order to return to the main menu.
34/39 00081193, Version 1.0