EuroLite LED TMH FE-1000 Bedienungsanleitung Seite 35

CALI
Wheel adjustment
With this function, you can calibrate and adjust the effect wheels to their correct positions.
• Select "CALI" by pressing [UP] or [DN].
• Press [ENTER], the display shows"CODE".
• Press [ENTER], the display shows"XXX".
• Enter the password "050" by pressing [UP] or [DN].
• Press [ENTER] to confirm.
• Press [MODE/ESC] in order to return to the main menu.
• Press [ENTER], the display shows"CHXX", "X" stands for the channel number.
• Select the desired channel by pressing [UP] or [DN].
• Press [ENTER], the display shows"XXX", "X" stands for the calibration value.
• Adjust the desired calibration value between –128 and 127 by pressing [UP] or [DN].
• Press [ENTER] to confirm.
• Press [MODE/ESC] in order to return to the main menu.
VER
Software version
With this function you can display the software version of the device.
• Select "VER" by pressing [UP] or [DN].
• Press [ENTER], the display shows "X.X.X", "X.X.X" stands for the version number, e.g.
"1.0.0", "2.6.0".
• Press [ENTER] to confirm.
• Press [MODE/ESC] in order to return to the main menu.
LOAD
Restore factory settings
With this function you can restore the factory settings of the device. All settings will be set
back to the default values (shaded).
• Select "LOAD" by pressing [UP] or [DN].
• Press [ENTER], the display shows "OFF".
• Press [UP] to select "ON" if you wish to enable this function or [DN] to select "OFF" if you
don't.
• Press [ENTER] to confirm.
• Press [MODE/ESC] in order to return to the main menu.
35/39 00081193, Version 1.0