Addressing The Projector; Dmx-Protocol; Cleaning And Maintenance - EuroLite 51913600 Bedienungsanleitung

Addressing the Projector

Set the dipswitch 10 to OFF. At least 1 dipswitch (from 1 – 9) must be set on ON.
Dipswitches 1 – 9 set the DMX addresses.
Controlling:
After having addressed all LED PAR-38 RGB Spots, you may now start operating these via your lighting
controller.

DMX-protocol

CLEANING AND MAINTENANCE

DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.
19/37 51913600_V_1_1.DOC