Dmx-Controlled Operation; Addressing The Device - EuroLite LED BAR-252 RGB 10mm Bedienungsanleitung

Sound Control Mode
In this mode, sound control mode can be set.
Slave Mode
In this mode, you can select and set the slave devices.

DMX-CONTROLLED OPERATION

You can control the devices individually via your DMX-controller. Every DMX-channel has a different
occupation with different features.

Addressing the Device

Controlling:
After having addressed the LED BAR-252 RGB 10mm, you may now start operating it via your lighting
controller.
Set DIP- Switch 9 to ON and 10 to OFF.
Sensitivity can be controlled by setting DIP-Switches 1 through 4.
Set DIP-Switch 10 to ON in order to determine the Slave device.
DIP-Switches 1 – 9 are on OFF.
Set the DIP-Switch 10 to ON.
Set the DMX Addresses via DIP-Switches 1 through 9.
22/24 00026099, Version 3.1