Herunterladen Inhalt Inhalt Diese Seite drucken

Start-Up; Addressing The Spots - EuroLite SUC-1 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

START-UP

Connect the desired number of LED X-PAR-64 Spots with one another. For this you will need a stereo
shielded cable with 3-pin XLR-plug connection.
Connect the SUC-1 with the first spot in the row via the data cable RJ45 with XLR, included in delivery.
Connect the SUC-1 to the mains with the power unit. You can switch the device on and off via the POWER
switch.
You can now begin addressing the LED X-PAR-64 Spots.
Warning: Danger of explosion when recharging standard batteries!
Please use either rechargeable batteries with the battery recharger or standard batteries only.

Addressing the Spots

After the device is turned on the display shows:EUROLITE DMX 512 Set V1.2
Press the ENTER-button and the display shows: DMX Addresser.
Press the ENTER-button to enter the main menu and to select the
Channel, A3 Model, A4 Run Auto Addr.
The first point of the menu is A1 Start.
A1 Start
Under this point of the menu you can set the start address of the LED X-PAR-64 Spots.
- Press the ENTER-button to confirm A1 mode.
- Press the "-" or the "+" button to set the desired addresses.
- After addressing the spots, press the ENTER-button to return to the main menu.
- Press the "-" button to move on to the next point of the menu.
Under this point of the menu you can set the number of desired channels (no fewer
A2 Channel
than 5). Please use your DMX controller as reference.
- Press the ENTER-button to confirm A2 mode.
- Press the "-" or the "+" button to set the desired number of channels.
- Press the ENTER-button to return to the main menu.
- Press the "-" button to move on to the next point of the menu.
A3 Model
Under this point of the menu you can set the number of LED X-PAR-64 Spots being used.
- Press the ENTER-button to confirm A3 mode.
- Press the "-" or the "+" button to set the desired number of spots.
- Press the ENTER-button to return to the main menu.
- Press the "-" button to move on to the next point of the menu.
mode of operation: A1 Start, A2
11/12
00027921.DOC, Version 1.0

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis