Rtsp Streaming - Instar In-5905 Hd Handbuch

l

10 RTSP STREAMING

To use third party software you usually need the direct path for the live video in order
to grab the video from your camera. Then the program is able to grab the video stream
from your camera to work with it. You can find step-by-step instructions for several
software on our help pages on
Access over your local network:
Please use the following path to use your camera with third party software:
RTSP Stream 1:
rtsp://<user>:<password>@192.168.x.x:<RTSP Port>/11
RTSP Stream 2: rtsp://<user>:<password>@192.168.x.x:<RTSP Port>/12
RTSP Stream 3: rtsp://<user>:<password>@192.168.x.x:<RTSP Port>/13
JPG Path:
http://<Benutzer>:<Passwort>@192.168.x.x/tmpfs/snap.jpg
Please use your camera login for the user and password values:
E.g.: rtsp://admin:123456@192.168.1.25:554/11
Just substitute the "x" according to the IP address of your camera (in case of a Netgear
router the first x = 1 and and the second x = the end octet of your camera's IP). If you
changed your RTSP port (standard = 554) please change the value after the IP address
accordingly.
Attention: To access the cameras RTSP stream through the internet you will have to
forward the RTSP port (standard = 554) to your camera's IP address. See chapter 5.2.3
and the forwarding procedure for the LAN (HTTP) port (standard 80) for reference.
Access via internet:
Please use your DDNS address to remote access your camera's RTSP stream:
rtsp://<user>:<password>@xxx.ddns-instar.de:<RTSP Port>/11
xxx = please check your personal DDNS address under network/DDNS (s. 5.2.3)
Tip: Your camera offers you 3 RTSP streams with different bitrates. Please choose
stream 2 or 3 if your available bandwidth is limited or you are using a computer with
limited processing power (e.g. netbook). You might encounter this problem especially
when accessing your camera via the internet, since normal DSL connections have a
relatively low upload rates.
www.instar.de .
30-
EN
(e.g. VLC Player, iSpy..)