Alarm - Instar In-5905 Hd Handbuch

5.4.2 MULTIMEDIA/VIDEO
The MJPEG mode of the camera allows you to access the videostream with your browser
without the need of additional browser-plugins! You can use the MJPEG mode when
you are accessing the camera from a system that doesn't allow you to install the ActiveX
control element or the QuickTime plugin for Firefox, Chrome or Safari. Please consider
that this mode is only for viewing the live image of your camera. Even with only one user
logged in your cameras framerate might drop below 4 fps because of the high bandwidth
requirements!
The MJPEG mode of the camera allows you to access the videostream with your browser
5.4.3 MULTIMEDIA/IMAGE
without the need of additional browser-plugins! You can use the MJPEG mode when
you are accessing the camera from a system that doesn't allow you to install the ActiveX
control element or the QuickTime plugin for Firefox, Chrome or Safari. Please consider
that this mode is only for viewing the live image of your camera. Even with only one user
logged in your cameras framerate might drop below 4 fps because of the high bandwidth
requirements!
5.4.3 MULTIMEDIA/IMAGE
l

5.5 ALARM

5.5.1 ALARM/AREAS
l
5.5 ALARM
5.5.1 ALARM/AREAS
Your camera detects motion by a picture analysis that is sensitive to every change inside
the video frame instead of employing an infrared or microwave sensor. In "Areas" you
Your camera detects motion by a picture analysis that is sensitive to every change inside
can adjust up to 4 detection areas in size and sensitivity for trigger event. Once the mo-
the video frame instead of employing an infrared or microwave sensor. In "Areas" you
tion detection in an area is activated, its sensitivity can be adjusted from very insensitive
can adjust up to 4 detection areas in size and sensitivity for trigger event. Once the mo-
(value=0) to very sensitive (value=100).
tion detection in an area is activated, its sensitivity can be adjusted from very insensitive
(value=0) to very sensitive (value=100).
The video settings allow you to adjust the quality of all
3 videostreams of your camera. Please be adviced that
high quality settings come with high requirements for
your computer hardware and network bandwidth. Ad-
just the video quality to obtain a fluent video accord-
ingly. Please refer to chapter 10: RTSP Streaming for
accessing the cameras streams 2 and 3.
Here you can adjust the image parameters brightness,
saturation, contrast, exposure (shutter) and sharpness.
You can flip and mirror the video image, display a time-
stamp, set a camera name and display it as well. The
displayed parameters are burnt into the camera image.
Please make sure to restart the camera after changing
the name.
Here you can adjust the image parameters brightness,
saturation, contrast, exposure (shutter) and sharpness.
You can flip and mirror the video image, can display a
timestamp and set a camera name and display it as well.
The displayed parameters are burnt into the camera im-
age. Please make sure to restart the camera after chang-
ing the name.
18-
EN