Instar IN-5907HD Bedienungsanleitung

INSTAR
1
OR OR
Connect your camera with your PoE power supply
via the included LAN cable or plug in the power
supply (User Manual Chapter 3 #11) to start the
camera.
4
Camera Name
Camera ID
Default User Name
Default Password
The QR code contains all the necessary information
to add your camera. Please be aware that the
default login credentials will be used. If you want to
change the default password please check the
Quick Installation Guide. The password can only
be changed in the web user interface.
5
The app will now connect to your cameras live
stream and you will be able to activate the audio
stream (needs an external microphone) and to take
snapshots.
2
INSTAR Model Nr: IN-7011HD
MegaPixel Kamera
Stromversorgung: 100-240VAC 50-60Hz / 5VDC, 1.5A
Mac LAN: 10D1DCXXXXXX
SerienNr: 601200001
Start our Android or iPhone app Instar Vision.
Choose to add a new p2p camera and start the
QR code scanner. Your QR code is located on a
lable on the camera case (s. above). Or use the
automatic search for local cameras.
6
The wps / p2p method allows you to quickly connect your camera and check the cameras live
stream. Please refer to the Quick Installation Guide for instruction on how to access additional
camera features.
Plug & Play
3
Scan the code to add your IN-5907 as a new
p2p camera and confirm the settings. If you
already changed the camera´s admin login,
please adjust this in the following dialogue
as well.
Power
over
Ethernet