l
7 LENSE ADJUSTMENT
The IN-5905 HDs lense offers a
limited field depth that was ad-
justed to a field between 1m to
10m. In case the object you want
to observe lies outside of this area,
you will have to adjust the lense
accordingly. Simply open the
camera from the front and turn
the lense until you can see the area
of your surveillance coming into
focus in the web user interface.
For detailed illustration, please
visit:
http://wiki.instar.com
Step 1: (Fig.1)First remove the top cover and loosen the three screws at the back plate.
Step 2: (Fig. 2) Hold the camera front, and gently open the casing.
Step 3: (Fig. 3) Gently pull out the inner parts. Then loosen the
lense
(not the bottom screw which connects the lense to the lense mount)
Step 4: (Fig. 4) Launch the WebUI on your computer. While keeping an eye on the cam-
era screen, turn the top part of the lense and adjust the focal until your target area under
surveillance becomes clear. Then tighten the lense screw(shown in Fig. 3).
Step 5: Carefully put the structure back to the casing, and make sure no cables are
bended, with special attention the two long cables connected to LED board. Please be
aware of the structure direction as shown as in Fig. 4. Tighten the screws that connect
the casing and the backplate and reassemble the camera carefully to its original position.
l
8 Android, WinPhone and iOS App
To integrate your IP camera in the App "InstarVision" we recommend to first download
the newest version in the App Store. To find the newest version just type "instar" for the
search.
(Fig. 1) After installing the newest version please start the app to open the following
interface (s. next page).
(Fig. 2) Now press the "New camera" button and type in all necessary data for your IP
camera.
(Fig. 3) Adjust your camera's parameters over the apps user interface.
(Fig. 4) Press a channel to access the corresponding livestream and take control over
your camera.
Fig. 1
Fig. 3
26-
EN
Fig. 2
UP
Fig. 4
upper screw
on the the