Start Up - Instar In-5905 Hd Handbuch

l

4 START UP

l
4.1 NETWORK INSTALLATION
Please start the setup wizard from the CD and install the INSTAR Camera Tool
linked on the CD for Windows, LINUX or MacOS. (You can find documentations
for the use of other IP scanners on http://faq.instar.de)
Please start the INSTAR Camera Tool.
The camera tool will automatically find all INSTAR IP cameras in your network
and will show their IP address.
In case your camera isn't found right away please wait 10 to 15 seconds for your
routers DHCP service to assign an IP address to your camera.
Double-click the camera's IP address inside the camera tool to open the web user
interface (webUI) with your default browser and you will be greeted by the cam-
era's login window. If so, please skip the following paragraph and go straight to 4.2
LOGIN (see page 11).
To install your camera please open the installation CD or simply
go to http://install.instar.de. Please follow each step for an easy
first setup of your camera. To find the camera in your network
we provide you with a free Windows, MacOS and
Linux tool that allows you to find, update and open
your camera on your computer. As an alternative you
can also use an IP scanner or check inside your rout-
er to find out the ip address of your new ip camera.
8-
EN