Web Userinterface Update; Reset Your Camera - Instar In-5905 Hd Handbuch

l
5.9.2 PAN&TILT CONTROL/POSITIONS
5.9 WEB USER INTERFACE UPDATE
How to upgrade to a new WebUI or Firmware
Please download the newest version of the WebUI or Firmware from our website. Please
follow the link below to our homepage´s download section:
Simply select your camera model, scroll to the bottom part of the website and choose the
l
5.10 WEB USER INTERFACE UPDATE
newest Software/Firmware for your IP camera.
How to upgrade to a new WebUI or Firmware
The firmware file can be uploaded to your camera via the web user interface (s.5.1.4) or
Please download the newest version of the WebUI or Firmware from our website. Please
by using the INSTAR camera tool.
follow the link below to our homepage´s download section:
Simply select your camera model, scroll to the bottom part of the website and choose the
newest Software/Firmware for your IP camera.
The firmware file can be uploaded to your camera via the web user interface (s.5.1.4) or
by using the INSTAR camera tool.
l

6 RESET YOUR CAMERA

In order to reset your camera (if you have lost your password), please hold the small
l
6 RESET YOUR CAMERA
camera reset button for min. 15 seconds. Make sure the camera is connected to the
power supply. If a reset was incomplete the camera might become inresponsive. Please
repeat the reset for min. 15 s and unplug the camera over night from the power supply
In order to reset your camera (if you have lost your password), please hold the small
before trying to restart it again.
camera reset button for min. 15 seconds. Make sure the camera is connected to the
power supply. If a reset was incomplete the camera might become inresponsive. Please
repeat the reset for min. 15 s and unplug the camera over night from the power supply
before trying to restart it again.
You can save up to 8 camera orientations by moving the camera
into the desired direction and clicking on one of the numbered
slots after choosing Save Position. Clicking on the slots 1-8 when
Go to Position is activated will move the camera back to the saved
position. You can delete all positions by clicking on Reset all Po-
http://download.instar.de
sitions. Position 1 defines the startup position of your camera!
http://download.instar.de
25-
EN