Instar IN-5905 HD Handbuch Seite 49

Troubleshooting:
In case the INSTAR Camera Tool doesn't find your INSTAR IP camera please make sure
that the status LED for the LAN connector is active. For troubleshooting please check
on page 8 in this user manual.
In case your camera isn't automatically assigned an IP address, the camera will be shown
inside a wrong IP address space. A double click on the camera's IP will then open the
IP / Network configuration window (see below) allowing to manually assign an address.
Please set the following information according to your network:
- IP Address (for example 192.168.x.x)
- Subnet Mask (for example 255.255.255.0)
- Gateway (IP Address of your router; for example 192.168.x.1)
- DNS Server (IP Address of your router; for example 192.168.x.1)
- Http Port (TCP Port; for example 80)
To check the IP address of your Windows computer and your network parameters
please do the following:
1. Click on [START] -> and type in "cmd" into the search field.
2. In the window that pops up please type "ipconfig".
3. Now the IP address and the subnet mask will be shown.
9-
EN