Setting Into Operation; Inserting Batteries Into The Microphones - Omnitronic UHF-202 Bedienungsanleitung

9
Power on/off with battery indicator
• lower position: off
• center position: mute
• upper position: on
The indicator shortly flashes when switching on; if
the indicator lights
operation, the inserted batteries must be replaced.

5. SETTING INTO OPERATION

5.1 Inserting batteries into the microphones

For operation, the microphones require two 1.5 V AA batteries each. Remove the cover of the battery
1
compartment on the rear side of the microphones. Insert two batteries as indicated in the compartment.
With new batteries, the microphones can be operated for approx. 10 hours. The power indicator shortly
2
lights up after switching on. If the indicator lights up continuously during operation the inserted batteries
are going flat and have to be replaced.
If the microphones are not used for a longer period (approx. 1-2 weeks), please remove the batteries to
3
prevent damage in case of battery leakage. Please refer to further explanations in chapter Safety
Instructions.
Only replace by the same type or similar types recommended by the manufacturer.
Remove empty battery in accordance with the instructions of the manufacturer.
Batteries are hazardous waste and should not be disposed of with regular domestic waste!
Please take discharged batteries to a collection center near you.
up continuously during
Danger of explosion when battery is replaced improperly.
BATTERY DISPOSAL NOTICE
Please dispose of discharged batteries properly.
10
Battery compartment for two 1.5 V batteries
CAUTION!
14/17 00074637.DOC, Version 1.0