Operation Using The Built-In Controller - Renkforce LV-PT12 Bedienungsanleitung

c) Operation Using the Built-in Controller
Static colours
• Push the button MENU (5), until "A1" shows in the display (4), followed by a number. The number is the colour
selection.
• Select the desired colour with the UP (6) and DOWN (7) buttons:
Display
A1.01
A1.02
A1.03
A1.04
A1.05
Colour Change Effect
• Push the button MENU (5), until "A2" shows in the display (4), followed by a number. The number is the speed of
the light effect.
• Select the desired effect speed with the UP (6) and DOWN (7) buttons.
Fade Effect
• Push the button MENU (5), until "A3" shows in the display (4), followed by a number. The number is the colour
selection.
• Select the desired colour with the UP (6) and DOWN (7) buttons:
Display
A3.01
A3.02
A3.03
A3.04
A3.05
A3.06
• Push the button ENTER (8) and select the desired effect speed with the buttons UP (6) and DOWN (7)
(A3.01 = slow / A3.32 = fast).
• Push the ENTER button (8) again to save the setting.
Colour Display
white A1.06
red A1.07
green A1.08
blue A1.09
light green A1.10
Colour Display
Colour change A3.07
red A3.08
green A3.09
blue A3.10
light green A3.11
light blue
Colour
light blue
violet
yellow green
magenta
sky blue
Colour
violet
Change red/green
Change red/blue
Change green/blue
Change red/green/blue
29