Renkforce LV-PT12 Bedienungsanleitung Seite 30

Sound-to-Light Mode
• Push the button MENU (5), until "A4" shows in the display (4), followed by a number. The number is the colour
selection.
• Select the desired colour with the UP (6) and DOWN (7) buttons:
Display
A4.01
A4.02
A4.03
A4.04
A4.05
A4.06
• Push the button ENTER (8) and select the desired sensitivity for the effect with the buttons UP (6) and DOWN (7)
(A4.01 = insensitive / A4.04 = sensitive).
• Push the ENTER button (8) again to save the setting.
Strobe Mode
• Push the button MENU (5), until "A5" shows in the display (4), followed by a number. The number is the colour
selection.
• Select the desired colour with the UP (6) and DOWN (7) buttons:
Display
A5.01
A5.02
A5.03
A5.04
A5.05
A5.06
• Push the button ENTER (8) and select the desired effect speed with the buttons UP (6) and DOWN (7)
(A5.01 = slow / A5.32 = fast).
• Push the ENTER button (8) again to save the setting.
Automatic Mode Without Setting Option
• Push the button MENU (5) until the display (4) shows "A6.01".
• There is no setting option for this function.
• Different pre-programmed effect lights are called in sequence.
30
Colour Display
Colour change A4.07
red A4.08
green A4.09
blue A4.10
light green A4.11
light blue
Colour Display
Colour change A5.07
red A5.08
green A5.09
blue A5.10
light green A5.11
light blue
Colour
violet
yellow green
magenta
sky blue
white
Colour
violet
yellow green
magenta
sky blue
white