Troubleshooting - JVC KD-SH1000 Bedienungsanleitung

Preset frequency level settings for each sound mode
Sound mode
Flat
Hard Rock
R&B
Pop
Jazz
Dance
Country
Reggae
Classic
User 1
User 2
User 3

Troubleshooting

What appears to be trouble is not always serious. Check the following points before calling a service
center.
• Sound cannot be heard from the speakers.
• The unit does not work at all.
• "Connect Error" appears on the display.
• "Push Reset" appears on the display and the
control panel movement is freezed.
• SSM automatic presetting does not work.
• Static noise while listening to the radio.
• "No Text" appears on the display.
• "Loading" does not disappear.
38
63 Hz 125 Hz 250 Hz 500 Hz
00 00 00
+06 +06 +04
+06 +04 +04
00 +04 +02
+06 +04 +02
+08 +04 +02
+04 +02 00
+06 +02 00
+04 +06 +04
00 00 00
00 00 00
00 00 00
Symptoms
Preset equalizing value
1 kHz 2 kHz
00 00 00
+02 00 00
+04 00 +02
00 00 +02
+02 +02 +02
00 –04 –02
00 00 00
00 +02 +04
+02 00 00
00 00 00
00 00 00
00 00 00
Remedies/Causes
• Adjust the volume to the optimum level.
• Check the cords and connections.
Reset the unit (see page 2).
Remove the control panel, wipe the connector, then attach
it again (see pages 4 and 33).
Reset the unit (see page 2). If this does not work, check the
installation.
Store stations manually.
Connect the aerial firmly.
The station does not support RDS RT or the reception is
weak.
Check the Network-Tracking Reception (see page 13).
The receiving signal is temporarily too weak to receive a
complete message although the service is available.
Check the Network-Tracking Reception (see page 13).
4 kHz 8 kHz 12.5 kHz
00 00 00
+02 +04 +02
+02 +02 +06
+02 +02 +04
+02 +06 +04
00 +02 +02
00 +02 +04
+04 +04 +06
+02 +04 00
00 00 00
00 00 00
00 00 00