More About This Unit; Basic Operations; Tuner Operations - JVC KD-SH1000 Bedienungsanleitung

To keep discs clean
A dirty disc may not play correctly.
If a disc does become dirty, wipe it
with a soft cloth in a straight line
from center to edge.
• Do not use any solvent (for example,
conventional record cleaner, spray, thinner,
benzine, etc.) to clean discs.
To play new discs
New discs may have some rough
spots around the inner and outer
edges. If such a disc is used, this
unit may reject the disc.
To remove these rough spots, rub the edges
with a pencil or ball-point pen, etc.
How to handle SD card
SD cards are precision products. DO NOT
impact, bend, drop, or wet them.
Do not use the following discs:
Warped disc
Sticker
34

Basic operations

Turning on the power
• By pressing SOURCE on the unit, you can
Turning off the power
• If you turn off the power while listening to a

Tuner operations

Storing stations in memory
• During SSM search...
• When storing a station manually, the
Sticker residue
FM RDS operations
• Network-Tracking Reception requires
Stick-on label
• If a Traffic Announcement is received by
• When Alternative Frequency Reception

More about this unit

also turn on the power. If the source is ready,
playback also starts.
disc, disc play will start from where playback
has been stopped previously, next time you
turn on the power.
– All previously stored stations are erased and
stations are stored newly.
– Received stations are preset in No. 1 (lowest
frequency) to No. 6 (highest frequency).
– When SSM is over, the station stored in
No. 1 will be automatically tuned in.
previously preset station is erased when a new
station is stored in the same preset number.
two types of RDS signals—PI (Programme
Identification) and AF (Alternative
Frequency) to work correctly. Without
receiving these data correctly, Network-
Tracking Reception will not operate correctly.
TA Standby Reception, the volume level
automatically changes to the preset level (TA
VOL) if the current level is lower than the
preset level.
is activated (with AF selected), Network-
Tracking Reception is also activated
automatically. On the other hand, Network-
Tracking Reception cannot be deactivated
without deactivating Alternative Frequency
Reception. (See page 24.)