Using The Equalizer-Eq - JVC KD-SH1000 Bedienungsanleitung

5
Select the distance between the
selected speaker and the seat.
Once you have set the distance, it is
memorized for each seat position selected
in step 3. The memorized setting is recalled
next time you select the seat position.
To change the measuring unit
6
Repeat steps 4 and 5 to adjust the
distance for the other speakers.
7
Finish the procedure.
Activating BBE Digital
BBE Digital is a digital processing method to
restore the brilliance and clarity of the original
live sound in recording, broadcasts, etc. When
a speaker reproduces sound, it introduces
frequency-dependent phase shifting, causing
high-frequency sounds to take longer to reach
the ear than low frequency sounds.
BBE Digital adjusts the phase relationship
between the low, mid, and high frequencies by
adding a progressively longer delay time to the
low and mid frequencies, so that all frequencies
reach the listener's ears at the proper time. A
more brilliance and clearer sound is heard.
1
Enter the BBE menu (see page 4).
2
Select the effect level.
3
Finish the procedure.
Using the equalizer—EQ
You can adjust the sound equalization patterns
to your preference by using either Graphic EQ
or Parametric EQ.
• Adjust the equalizer to match the
reproducible frequency range of the
connected speakers; otherwise, the
adjustments may not be effective.
Selecting preset sound modes—
Graphic EQ
Sound modes
Flat (No sound mode is applied), HardRock, R&B
(Rhythm&Blues), Pop, Jazz, Dance, Country, Reggae,
Classic, User 1, User 2, User 3
1
Enter the EQ menu (see page 4).
2
3
Select a sound mode.
4
Finish the procedure.
19