General Settings - Psm - JVC KD-SH1000 Bedienungsanleitung

General settings — PSM
You can change PSM (Preferred Setting Mode)
items listed in the table that follows.
1
Enter the PSM menu (see page 4).
2
Select a PSM item.
Indications
Demo
Display demonstration
Anime
Animation
Clock H
Hour adjustment
Clock M
Minute adjustment
24H/12H
Time display mode
CLK Adj
Clock adjustment
Scroll 1
*
Items Settings, [reference page]
• On [Initial] : Display demonstration will be activated automatically if no
operation is done for about 20 seconds, [8].
• Off : Cancels.
• On [Initial] : An animation screen appears when you turn on or off the power,
change the source, and when you select an EQ, MENU, or DSP.
• Off : Cancels.
0 – 23 (1 – 12) : See also page 8 for setting.
[Initial: 0 (0:00)]
00 – 59 : See also page 8 for setting.
[Initial: 00 (0:00)]
• 12Hours : See also page 8 for setting.
• 24Hours [Initial]
• Auto [Initial] : The built-in clock is automatically adjusted using the CT (clock
time) data in the RDS signal.
• Off : Cancels.
• Once [Initial] : For track information: scrolls the track information once.
For RDS Radiotext: scrolls the text message continuously.
For DAB text: scrolls the detailed DAB text.
• Auto : For track information: repeats scrolling (in 5-second intervals in
between).
For RDS Radiotext: scrolls the text message continuously.
For DAB text: scrolls the detailed DAB text.
• Off : For track information: cancels.
For RDS Radiotext: shows only the first page of the text message.
For DAB text: shows only headline if any.
3
Select or adjust the selected PSM item.
4
Repeat steps 2 and 3 to adjust the
other PSM items if necessary.
5
Finish the procedure.
Continued on the next page
23